Monday, April 30, 2012

Reliance Controls PC3020 20-Feet 30 Amp L14-30 Generator Power Cord for Up to 7,500-Watt Generators

Reliance Controls PC3020 20-Feet 30 Amp L14-30 Generator Power Cord for Up to 7,500-Watt Generators Review



Reliance Controls PC3020 20-Feet 30 Amp L14-30 Generator Power Cord for Up to 7,500-Watt Generators Feature

  • 30 Amp power cord for use with Reliance products
  • For use with Reliance transfer switches, transfer panels, and power inlet boxes
  • 10-gauge 4 wire; NEMA L14-30 plug and connector ends
  • UL listed
  • 20 feet in length; 5-year warranty
The Reliance Controls 20-foot 30 Amp power cord is designed for use with Reliance manual transfer switches, transfer panels, and power inlet boxes. This heavy-duty power cord features 10-gauge, 4-wire, NEMA L14-30 plug and connector ends. It is UL listed and covered by a 5-year warranty. For connecting generator output receptacles and either Reliance Raintight power inlet box or transfer switches with appropriate power inlets. Four conductor 120/240 Volt. Sturdy, all-weather construction. UL listed. Connector Type: Power cord, Length (ft.): 20, Amps: 30, Volts: 120 / 240, Watts: 7,500, UL Listed: Yes


Sunday, April 29, 2012

Yamaha EF2400iSHC Inverter Generator 2,400 watts

Yamaha EF2400iSHC Inverter Generator 2,400 watts Review



Yamaha EF2400iSHC Inverter Generator 2,400 watts Feature

  • Starts high efficiency 13,500 btu A/C in temperatures up to 110° F
  • Pulse Width Modulation (PWM) to produce high-quality electricity
  • Meets emmision regulations, including CARB
  • Compact and Lightweight
  • Pull-to-Start (Recoil Start)
? This model boasts High Current output which is designed specifically to increase motor starting capability and to improve air conditioner starting. This High Current model starts most high efficiency 13,500 btu AC in temperatures up to 110° F. ? The EF2400iSHC uses Pulse Width Modulation (PWM) to produce high-quality electricity on the same level as that supplied by public utilities. Use this generator with confidence as a power source for microcomputer-controlled appliances and other devices with built-in computer functions. ? Yamaha's Smart Throttle feature automatically adjusts engine speed to match the load. The result is quiet running, maximum fuel efficiency, and a run time of 8.6 hours at 1/4-capacity load. Features ? Pulse Width Modulation - Provides power that is as clean, or cleaner than commercial power. ? Smart Throttle feature - Adjusts the engine speed to precisely match the load. * Oil Watch protection system - Stops the engine if the oil level gets low. ? OHV engine - Improved efficiency, increased reliability, quieter operation. ? Versatile power in the silent, 2000-watt class - Will run most 13,500 btu RV air conditioners, microwave/convection ovens, or even the biggest hair blow dryer. ? Engine speed at full load (2400 watts) is only 3400 rpm - Quiet operation. ? Cast iron cylinder liner - Provides long engine life and consistent performance during continuous use. ? Aluminum die cast frame - Strong yet lightweight. ? Gasoline petcock lets you shut off the gas to run the carb dry for storage - Prevents stale gas problems. ? 12 volt DC cable is included as standard equipment - Charge RV, ATV, motorcycle, marine and automotive batteries. ? EPA & CARB Emission Engine Life Rating - Yamaha generators have the longest emission engine life ratings issued by the environmental Protection Agency and the California Air Resources Board. ? 50 state legal - Meets emmision regulations, including CARB.


Saturday, April 28, 2012

Coleman Cable 09021 12/3 9-Inch Generator Cord Adapter, L5-20P to 5-15R

Coleman Cable 09021 12/3 9-Inch Generator Cord Adapter, L5-20P to 5-15R Review



Coleman Cable 09021 12/3 9-Inch Generator Cord Adapter, L5-20P to 5-15R Feature

  • Molded male and female connectors
  • 3-conductor, 12-gauge
  • Contractor grade, circular saw, heater, table saw
  • Stw, 125-volt
  • Ul listed and meets osha specifications
Locking Adapters Type: Locking Amperage Rating: 20A Length Ft.: 9 Wire Type: STW-A Wire Gauge/Number of Conductors: 12/3


Friday, April 27, 2012

Socket, NEMA L14-30 30 Amp, 125/250V Twist Lock

Socket, NEMA L14-30 30 Amp, 125/250V Twist Lock Review



Socket, NEMA L14-30 30 Amp, 125/250V Twist Lock Feature

  • 30 Amp 120/240V generator/ R/V cord socket. NEMA L14-30
Product Features: Amperage: 30 Amp Voltage: 125/250 Volt NEMA: L14-30P Pole: 3 Wire: 4 Cord Range: .595 - 1.150 Wire Gauge: 14-8 AWG Blades/Contacts: Solid Brass Body Material: Super Tough Nylon Assembly Screws: Steel, Zinc Plated Color: Black-White Standards and Certifications: UL/CSA


Thursday, April 26, 2012

Reliance Controls 20216A Pro/Tran 6-Circuit 20-Amp Generator Transfer Switch for up to 5000-Watt Generators

Reliance Controls 20216A Pro/Tran 6-Circuit 20-Amp Generator Transfer Switch for up to 5000-Watt Generators Review



Reliance Controls 20216A Pro/Tran 6-Circuit 20-Amp Generator Transfer Switch for up to 5000-Watt Generators Feature

  • Generator transfer switch for up to 5000-watt generators
  • The 18-inches flexible conduit whip attaches easily to the load center and all wires are clearly marked
  • Features a powder-coated steel cabinet with six combination 1/2-inches and 3/4-inches knockouts and resettable branch rated circuit breakers
  • Includes a covered opening to accommodate a power inlet for installation in a dry location and non-defeat able double-throw switches
  • This indoor surface-mount transfer switches are designed for fast installation in residential and commercial applications; UL listed
The safe, code-approved way to provide emergency power to your home or business during a power outage. The proper connection between a portable generator and selected circuits in a load center allows the user to efficiently and easily operate appliances such as a furnace, refrigerator, sump pump, TV, well pump, lights and more. Power can be manually transferred for each appliance independently at users choice without danger of backfeeding the electrical utility. Internal wiring compartment allows for optional hardwiring to remote power inlet boxes. Dual wattmeters monitor load in generator. Completely pre-wired with individual wires marked by circuit. Indoor surface-mount design. UL listed. 5-year limited warranty. U.S.A. Circuits (qty.): 6, Amps: 20, Watts: 5,000


Tuesday, April 24, 2012

Generac RTSX100A3 Nexus Smart Switch 100 Amp

Generac RTSX100A3 Nexus Smart Switch 100 Amp Review



Generac RTSX100A3 Nexus Smart Switch 100 Amp Feature

  • More backup coverage with a smaller generator
  • Additional DLM Modules can manage up to four more large electrical loads (sold separately)
  • Aluminum enclosure
  • 120/240 1 NEMA 3R
Engineered with Generac's Digital Load Management (DLM) technology, the Nexus Smart Switch is the smartest transfer switch on the market. It has the ability to cycle on and off two air conditioners without adding additional components, allowing for a smaller generator to cover more circuits than when paired with a standard transfer switch.


Saturday, April 21, 2012

Generac RTS16EZA1 EZ Switch 16-circuit Load Center

Generac RTS16EZA1 EZ Switch 16-circuit Load Center Review



Generac RTS16EZA1 EZ Switch 16-circuit Load Center Feature

  • Switch 16 circuit load center
  • 30-feet prewired conduit for connecting the transfer switch to the external connection box
  • 2-feet prewired conduit for moving circuits from the main panel to the transfer switch
  • Prewired external connection box with a weatherproof conduit
  • Switches are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint
The Generac EZ Switch with 16 circuit load center is ideal for homeowners who choose to backup selected circuits rather than the whole house. Pre-wired for the easiest installation on the market.


Wednesday, April 18, 2012

IPI Industries Breeze Extended Run Generator System - BERG System: Single Feed, Model# HND1.2-000iS

IPI Industries Breeze Extended Run Generator System - BERG System: Single Feed, Model# HND1.2-000iS Review



IPI Industries Breeze Extended Run Generator System - BERG System: Single Feed, Model# HND1.2-000iS Feature

  • Compatible with: Honda EU1000i, EU2000i; Generac IX800, IX1600, IX2000; All Power APG3101, APG3102; ETQ IN800i, IN1800i
No more refueling your generator in the middle of the night! Keep your inverter generator running for up to 72 hours with the BERG System by joining your generator to the external fuel tank and extending the continuous run time. The vacuum draw technology enables the fuel to flow seamlessly from the BERG System to the generator, thus allowing you to set it, start it and forget it. U.S.A.

Not for sale in California. Common Usage: Extended run fuel system, Capacity (gal.): 6, Compatible With: Honda generators, Compatible With Item Number (s): 167201, 100328, 16672, 16673, and 100329, Extended Run: 72 hours, Fuel Type: Gasoline, UL Listed: No, Material Type: Polyethylene, Dimensions L x W x H (in.): 21 1/2 x 13 1/4 x 10, Includes: Aircraft aluminum gas cap and connecting hose lines


Monday, April 16, 2012

Sunforce 7 Amp Charge Controller

Sunforce 7 Amp Charge Controller Review



Sunforce 7 Amp Charge Controller Feature

  • Protects battery from overcharge and discharge
  • For use with 12 Volt solar panels and batteries only
  • Handles up to 7 amps of array current and up to 105 watts of solar power
  • Maintains 12V batteries in a fully charged state
  • Operation: Yellow charging light indicates battery charging and green light indicates fully charged battery

The Sunforce 60012 7 Amp Charge Controller prevents overcharging and discharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. It can handle up to 7 amps of array current and up to 105 watts of solar power. The controller is easy to use with a yellow charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery.

Key Component of a Solar System Over 15 Watts

A charge controller is a very important feature of a solar system and must be used on all systems over 15 Watts. A charge controller protects your batteries from overcharge and discharge. Charge controllers are the maintenance free protection of your solar panel and batteries.

A charge controller monitors the battery’s state-of-charge to insure that when the battery needs change-current, it gets it, and also insures the battery isn’t overcharged. Connecting a solar panel to a battery without a regulator seriously risks damaging the battery and potentially causing a safety concern.

Charge controllers are rated based on the amount of amperage they can process from a solar array.


The Sunforce 60012 7 Amp Charge Controller prevents overcharging and discharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. It can handle up to 7 amps of array current and up to 105 watts of solar power. The controller is easy to use with a yellow charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery.


Saturday, April 14, 2012

GenTran 25-Foot 10/3 30-Amp Generator RV Hook Up Power Extension Cord RJB10325RV

GenTran 25-Foot 10/3 30-Amp Generator RV Hook Up Power Extension Cord RJB10325RV Review



GenTran 25-Foot 10/3 30-Amp Generator RV Hook Up Power Extension Cord RJB10325RV Feature

  • GenTran extension cord is the connecting link between the generator and the power inlet box for RV applications
  • A safe convenient way to connect your RV to your portable generator; works with parallel power kit model 73171A
  • Includes RV plug, RV receptacle, and STW cord
  • The extension cord measures 25-feet with 30 amp 10/3
  • The heavy duty all rubber power cords stays flexible even in subzero temperatures; model RJB10325RV
RJB10325RV - 30 Amp 25 Foot RV Extension Cord


Thursday, April 12, 2012

Briggs & Stratton Maintenance Minder Hour Meter 5081H

Briggs & Stratton Maintenance Minder Hour Meter 5081H Review



Briggs & Stratton Maintenance Minder Hour Meter 5081H Feature

  • Maintenance Minder and Hour Meter
  • Display Flashes every 25 Hours of Run Time
  • For 2 and 4-Cycle Engines
  • Genuine Briggs & Stratton Part
Briggs Stratton Small Engine Parts # 5081H HOURMETER-MAINT MNDR


Wednesday, April 11, 2012

Prime GCT20802 Generator Adapter, 25 ft 20 Amp "Y"

Prime GCT20802 Generator Adapter, 25 ft 20 Amp "Y" Review



Prime GCT20802 Generator Adapter, 25 ft 20 Amp "Y" Feature

  • Enables the user to draw a full 20 Amp load
  • 25 ft. 12/3 STOW wire
  • Double jacketed, super abrasion resistant, oil and water resistant
  • Flame Retardant
  • Ultra flexible in extreme temperatures
The Prime Twist-to-U Y adapter is a heavy-duty oil- and water-resistant cord that is built to perform in a variety of jobsite conditions. Connector Type: Adapter cord, Length (ft.): 2, Amps: 20


Sunday, April 8, 2012

Sunforce 50048 60-Watt Solar Charging Kit

Sunforce 50048 60-Watt Solar Charging Kit Review



Sunforce 50048 60-Watt Solar Charging Kit Feature

  • Amorphous solar charging kit provides up to 60 watts of clean, free, renewable power
  • Designed for RVs, cabins, homes, boats, back-up and remote power use
  • Weatherproof, durable solar panels can withstand impacts from hailstones travelling 50 miles-per-hour
  • Built-in blocking diode helps protect against battery discharge at night
  • Complete kit includes four 15W amorphous solar panels, a PVC mounting frame, a 7-amp charge controller, 200-watt inverter, and wiring/connection cables
The Sunforce 50048 60-Watt Solar Charging Kit gives you several more reasons to love the sun. It provides the power you need, while helping you save money and protect the environment. This kit is ideal for cabins, recreational vehicles, remote power, back-up power, and 12-volt battery charging. It comes with everything you need to start producing up to 60 Watts/4 Amps of clean, free power in all weather conditions.


Sunforce kits are easy to set up and operate.
Convenient Power That Helps You Save Money and Protect the Environment
The Sunforce 50048 60-Watt Solar Charging Kit lets you harness the power of the sun, the most powerful and plentiful source of energy available to us. This inexhaustible supply of power is freely available wherever the sun shines, and gives users the freedom to power their homes, RVs, boats, batteries, and electronic equipment far from civilization or right in town. Solar power can help cut your energy bills by reducing your dependence on the main electrical grid, and can also provide back-up power during outages. Unlike nuclear and fossil fuels, solar power systems are clean and pollution-free, and they require very little maintenance to operate.


Sunforce Solar Panels are effective in areas of both high and lower
sun exposure, making them ideal for use in the United States.
View Larger
Everything You Need to Power Up
The Sunforce 50048 60-Watt Solar Charging Kit has everything you need to start generating power. It includes four (4) 15-Watt amorphous solar panels with durable mounting frames, a 200-Watt modified sine wave power inverter, a 7-Amp solar charge controller, and a wiring kit with accessories for easy installation.

With built-in blocking diode technology, this solar charging kit is designed to protect against battery discharge at night. You can also use this kit to maintain the charge on any 12-Volt battery for clean, silent operation of various electronics, such as deer feeders and landscaping pumps. You can also use this kit to maintain the charge on any 12-Volt battery for clean, silent operation of various electronics, such as deer feeders and landscaping pumps and is a great choice for automobiles, recreational vehicles, tractors, all-terrain vehicles, boats, electric fences, telemetry and more.

About Amorphous Solar Power
Amorphous solar panels are created by spraying silicon on to glass in very thin layers, and are commonly known as thin film solar panels. This process allows them to be better at generating electricity in all lighting conditions, including cloudy or shady environments. Sunforce amorphous solar panels are weatherproof and suitable for outdoor use. They have a maximum operating temperature range of -40 to 176-degrees Fahrenheit, require virtually no maintenance, and are also effective on cloudy days. They can even withstand impacts from one-inch hailstones at 50 miles-per-hour.

Solar panels convert sunlight into an electric current, they do not store power. Sunforce Solar Charging Kits are primarily used to recharge 12-Volt batteries (not included), which store and provide usable power. The included 200-Watt power inverter allows you to use traditional 110-Volt appliances with this system. The included Sunforce 7-Amp Solar Charge Controller must be installed to prevent any connected batteries from overcharging. Once fully charged, it is normal for the charge controller LED to turn off and on as the battery voltage fluctuates from the discharge/recharge cycle.

Product Dimensions
Shipping Box: 41" x 13 1/4" x 16 1/4", 62.4 lbs
Individual Panel: 42.5" x 1.5" x 16", 11 lbs
The Sunforce 60-Watt Solar Charging Kit gives you several more reasons to love the sun. Perfect for cabins, recreational vehicles, remote power, back-up power, 12V battery charging and more, this kit comes with everything you need to start producing up to 60 watts/4 amps of clean, free power in all weather conditions. It is also a great choice for clean and silent operation of various electronics, like deer feeders and landscaping pumps. Made of durable ABS plastic and amorphous solar cells, the solar panels will charge in all daylight conditions, even on cloudy days. With built-in blocking diode technology, this charger kit is designed to protect against battery discharge at night. This kit includes: four 15W amorphous solar panels ,a PVC mounting frame, 7 -amp charge controller, 200 Watt inverter, and wiring/connection cables. The maximum temperature range is -40 to 176-degrees Fahrenheit. The Sunforce 60 Watt Solar Charging Kit is the ideal solution for providing the power you need, while helping you save money and protect the environment.


Saturday, April 7, 2012

Honda Extended Run Fuel Cap fits EU2000i Generator

Honda Extended Run Fuel Cap fits EU2000i Generator Review



Honda Extended Run Fuel Cap fits EU2000i Generator Feature

  • Use this gas cap to extend the range of your generator with a external tank.
  • Knurled for easy grip when opening or closing.
  • CNC machined from a solid piece of HIGH QUALITY 6061 T6 ALUMINUM.
  • The cap has a 1/4" female thread inside. Use a 1/4" brass male fitting with a hose barb that screws into the cap
  • Made in the USA.
Honda Eu2000i GENERATOR EXTENDED RUN FUEL GAS CAP Features: * Use this gas cap to extend the range of your generator with a external tank. * Knurled for easy grip when opening or closing. * CNC machined from a solid piece of HIGH QUALITY 6061 T6 ALUMINUM. * The cap has a 1/4" female thread inside. Use a 1/4" brass male fitting with a hose barb that screws into the cap * Made in the USA. Now you want have to wake up in the middle of the night to add more fuel.


Wednesday, April 4, 2012

Amerec ADP Stainless Steel Generator Drip Pan

Amerec ADP Stainless Steel Generator Drip Pan Review



Amerec ADP Stainless Steel Generator Drip Pan Feature

  • The ADP generator drip pan is designed for use with AK and 3K series steam generators
  • The ADP drip pan is constructed of stainless steel, features welded corners for reliability and an integral 3/4-Inch stainless drain fitting
One required per generator. For use with AK & 3K Series


Generac 5663 Maintenance Kit for 10kW, 530cc Engine

Generac 5663 Maintenance Kit for 10kW, 530cc Engine Review



Generac 5663 Maintenance Kit for 10kW, 530cc Engine Feature

  • Includes: air filter, oil filter, spark plugs, oil funnel, chamois
  • Oil must be purchased separately
Scheduled maintenance is a necessity for all standby generators. The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on Generac air-cooled generators. Maintenance is recommended at every 200 hours or 2 years. If running in a dusty environment, more frequent maintenance may be required. Further maintenance details can be found in the generator owner's manual.